Staff List

Awards/Fellowships/Prizes:

1. State award for Best Teacher on 7^th September 2016 from the Government of Andhra Pradesh
2. Best Teacher award on 4^th September 2015 from Confederation of Education Excellence, New Delhi

• University Best Teacher award on 14^th November 2013 from the Vice-chancellor of JNTU Kakinada, during University formation day celebrations.

1. Research Excellency award from Indo-Global foundation, an international organization supported by the Government of Andhra Pradesh
2. Chaired a session in the International conference on applied mechanics, materials and manufacturing (ICAMMM-2012), 19-21 Feb’ 2012, Kualalampur, Malaysia.
3. Chaired a special session in IEEE approved International conference on Electrical, Electronics, and Optimization Techniques (ICEEOT) – 2016, Chennai, Tamilnadu, during 3-5, March 2016.

• Telugu Vignana Parithoshakam, Government of Andhra Pradesh (1988-1991)

 Professional Recognition:

1. Editorial Board Correspondent, IIM Metal News, 2015-16
2. Vice-Chairman, Indian Institute of Metals, Visakhapatnam Chapter (2013 – 2018)
3. EC Member, Metallurgical and Materials Division, Institution of Engineers, Visakhapatnam chapter (2013-2015)
4. Member of the Editorial Review Board of the ‘International Journal of surface engineering and Interdisciplinary Materials Science, Inderscience Publishers.
5. Reviewer for the International Journal of Materials Engineering Innovation, Inderscience Publishers.
6. Reviewer for the International Journal of Materials and structural integrity, Inderscience Publishers.
7. Editorial Board Member, Advances in Materials Science and Mechanical Engineering Research (AMSMER), International Research Publication house
8. Editorial Board Member, International Journal of Nano Science and Nanotechnology (IJNN), International Research Publication house
9. Editorial Board Member, International Journal of Manufacturing and Mechanical Engineering (IJMME), International Research Publication house

Present position:

PRINCIPAL, JNTUK University College of Engineering, Vizianagaram (06-12-2019 to till date) &

Head, Department of Metallurgical Engineering (16-02-2016 to till date)

1. Principal, JNTUK University College of Engineering, Vizianagaram. (06-12-2019 – Till date)
2. Member, Standing Committee of Academic Senate, JNTU Kakinada (06-12-2019 – Till date)
3. Member, University Building Committee, JNTUK (06-12-2019 – Till date)
4. Vice Principal (Administration) - (27-02-2016 to 15-11-2018)
5. Head, Department of Metallurgical Engineering, JNTUK University College of Engineering, Vizianagaram. (2016 – Till date)
6. Member, College Academic Council, University College of Engineering, Vizianagaram, JNTUK (highest body of the College)
7. Chairman, Board of Studies, Department of Metallurgical Engineering, JNTU Kakinada (2016 - till date)
8. Head, Department of Mechanical Engineering, University College of Engineering, Vizianagaram, JNTUK (2010-2012)
9. Member, Board of Studies, Department of Metallurgical Engineering, JNTU Kakinada (2012 - 2015)
10. Member, Research Review Committee, Department of Metallurgical Engineering, JNTU Kakinada (2016 – till date)
11. Member, Ph.D admission committee, Department of Metallurgical Engineering, JNTUK, Kakinada (2016 –till date)
12. Officer–in-charge of examinations, JNTUK University college of Engineering, Vizianagaram, JNTUK (2010-2012)
13. Coordinator, Nodal Centre, JNTUK, University College of Engineering, Vizianagaram (2009-2011)
14. Co-ordinator, TEQIP, JNTUH, University College of Engineering, Hyderabad
15. Coordinator, Ed-CET Counseling help line centre, Vizianagaram.
16. Associate Professor, Department of Metallurgical engineering, JNTU Hyderabad ( 2006 – 2007)
17. Associate Professor in Metallurgical Engineering, JNTU College of Engineering, Vizianagaram (2007 – 2012)
18. Professor in Metallurgical Engineering ( 2012 – till date)
19. Member of EAMCET Confidential team ( 2010 and 2011)
20. Chairman, Purchase Committee, JNTUK University College of Engineering, Vizianagaram.
21. Vice-President, Sports Committee, JNTUK University College of Engineering, Vizianagaram.(2016 – 2018)
22. Vice-President, Alumni Association, JNTUK University College of Engineering, Vizianagaram.(2016 – 2018)

1. Member, Fact Finding Committees (in respect of extension of affiliation for the colleges affiliated to JNTUK, Kakinada)
2. Member, Governing bodies of different colleges affiliated to JNTUK
3. Member, Board of Studies, Department of Metallurgical Engineering, Andhra University, Visakhapatnam, Andhra Pradesh. (2014-17 and 2017-20)
4. Member, Board of Studies, Department of Metallurgy and Materials technology, Yogi Vemana College of Engineering, Yogi Vemana University, Proddutur, kadapa (2019- till date)
5. Data Auditor, TEQIP (world Bank project) Phase-II, for JNTUA, Pulivendula and KU, Kothagudem. (2014 – 2017)
6. Paper setter to JNTU Kakinada, JNTU Hyderabad , JNTU Ananthapur, AU and GITAM University
7. Examiner for B.Tech and M.Tech projects, JNTU Kakinada and AU Visakhapatnam
8. Adjudicator and examiner for Ph.D thesis evaluation
9. Member, AICTE Expert Verification Committee
10. Member, AICTE-AQIS Evaluation committee

Metals and alloys, Deformation behavior, severe plastic deformation, metal forming, composite materials, nano materials and characterization.

1. Thesis Guidance:

Ph.D = 03 (awarded) and 12 (in progress)

M.Tech = 20 (awarded), 12(in progress)

1. Tech = 200
2. Publication:

                                  International Journals =33

         International Conference = 13, National Conference=02

3. Patents:

1. Member, Minerals, Metals & Materials Society, Pittsburgh, USA, 550223
2. Fellow Member, Institution of Engineers, F-120136-7
3. Life Member, Indian Institute of Metals, 46459
4. Life Member, Indian Society for Technical Education, LM-80984
5. Life Member, Indian Institute of Mineral Engineering, Membership number is LM-1174
6. Life Member, Institute of Smart Structures and Systems, LM-675
7. Life Member, Materials Research Society of India, LMB2621

1. President, Teachers Association, University College of Engineering, Vizianagaram, JNTUK ( 2013-2014)
2. Vice-President, Alumni Association, University College of Engineering, Vizianagaram, JNTUK ( 2016-2017)
3. President, Teachers Association, University College of Engineering, Vizianagaram, JNTUK ( 2016- 2017)

1. Chairman and Organizing Secretary for the International Conference on “Advanced Materials and Manufacturing Processes”, organized in association with Indian Institute of Metals, Vizag chapter, at the Department of Metallurgical Engineering, JNTUK University College of Engineering, Vizianagaram, during 30^th and 31^st of March 2018.
2. Chairman and Coordinator for the one day workshop on “Advances in composites and ferroalloy technology”, organized in association with Indian Institute of Metals, Vizag chapter, at the Department of Metallurgical Engineering, JNTUK University College of Engineering, Vizianagaram, during 22^nd August 2017.
3. Chairman and Coordinator for the two day National workshop on “Fatigue, Fracture and Creep of Materials” organized in association with Indian Institute of Metals, Vizag chapter, at the Department of Metallurgical Engineering, JNTUK University College of Engineering, Vizianagaram, during 16^th and 17^th of September 2016
4. Chairman and organizing secretary for the two day National level student technical symposium titled ‘EISEN-2016’ organized in association with Indian Institute of Metals, Vizag chapter, at the Department of Metallurgical Engineering, JNTUK University College of Engineering, Vizianagaram, during 1^st and 2^nd of March 2016
5. Chairman and organizing secretary for the two day National level student technical symposium titled ‘EISEN-2015’ organized in association with Indian Institute of Metals, Vizag chapter, at the Department of Metallurgical Engineering, JNTUK University College of Engineering, Vizianagaram, during 3^rd and 4^th of March 2015
6. Convener for Twenty eighth national convention of “Metallurgical and Materials Engineers”, organized at JNTUK, UCE Vizianagaram in association with Institution of Engineers (India), Visakhapatnam local centre, during 23^rd and 24^th January 2015
7. Chairman and organizing secretary for the one-day national workshop on “Solid waste management in ferrous and non-ferrous industries” organized in association with Indian Institute of Metals, Vizag chapter, at JNTUK University College of Engineering, Vizianagaram, during 6^th December 2014.
8. Chairman and Coordinator for the National level student technical symposium titled ‘EISEN-2014’ organized in association with Indian Institute of Metals, Vizag chapter, at the Department of Metallurgical Engineering, JNTUK University College of Engineering, Vizianagaram, during 12^th and 13^th of March 2014
9. Coordinator for two-day national workshop on “Advances in Materials and Processing Technology (AIM&PT)” organized in association with Institution of engineers, at JNTUK University college of engineering, Vizianagaram,  during 8^th and 9^th of March 2014
10. Coordinator for the National level student technical symposium titled ‘MECHANO’ organized during 28^th and 29^th of February 2012, in the Department of Mechanical Engineering, JNTUK University College of Engineering, Vizianagaram.
11. Coordinator for the National level student technical symposium titled ‘MECHANO’ organized during the 1^8th and 1^9th of March 2011, in the Department of Mechanical Engineering, JNTUK University College of Engineering, Vizianagaram.
12. Coordinator for two day national workshop on “Advanced materials and processing”

Organized at JNTUK University college of engineering, Vizianagaram, during 22^nd and 23^rd Feb 2010

1. Delivered invited talk on “Advances in Metal Matrix Composites”, in the International conference on Emerging trends in materials and manufacturing engineering (IMME-2017), held during 10-12 March, 2017, organized by the Department of Metallurgical and Materials Engineering, NIT, Trichy.
2. Delivered invited talk on “Wear Characterization of Metal Matrix Composites” in the one week faculty development programme on Advances in manufacturing of Composites held during 27^th November – 2^nd December 2017 in the department of Mechanical Engineering, Sasi Institute of Technology and Engineering, Tadepalligudem.
3. Resource person in AICTE funded two week faculty development programme on contemporary advances in Materials and Manufacturing Engineering (CAMME-2017), held during 30^th October -10^th November, 2017 in the Department of Mechanical Engineering, JNTUK College of Engineering, Kakinada.
4. Delivered an Invited Lecture on “Composite materials an over view” during the Faculty Development programme on “Research potential and scope in Mechanical Engineering”, conducted under TEQIP Phase-II, at AITAM, Tekkali, during 27^th September -2^nd October, 2016
5. Delivered an Invited Lecture on “Fracture Mechanics” during the Faculty Development programme on Research potential and scope in Mechanical Engineering, conducted under TEQIP Phase-II, at AITAM, Tekkali, during 27^th September -2^nd October, 2016
6. Delivered an Invited Lecture on “Advances in Metal Matrix Composites” in the national conference on Advances in Composite Materials (NCACM-2015) conducted during 21-22 February 2015 at GIET, Gunupur, Orissa.
7. Delivered an Invited Lecture on “Applications of textile Composites” during the National Workshop on Advanced Materials and Materials Processing conducted during 21^st and 22^nd February 2010 at JNTUK University College of Engineering, Vizianagaram.

1. One day workshop on “Leadership and communication skills”, organized by JNTUK, Kakinada, on 5^th December 2015.
2. NRC-M workshop on “Polymers-Properties, characterization and applications” organized at UGC Networking Resource Centre for Materials, Department of Materials Engineering, Indian Institute of Science, Bangalore, during 1-4 July, 2014.
3. Workshop on “Turnitin-an anti plagiarism software” conducted at R&D centre, JNTU Kakinada, on 24^th January, 2014.
4. Workshop on “Training resource persons on Outcome based accreditation – Phase-II” conducted by NBA nodal centre at JNTUK University college of engineering, Vizianagaram, during 26-28 September, 2013.
5. One day NRB Research Dissemination workshop on “Titanium matrix composites”, conducted by Department of metallurgical and Materials Engineering, Indian Institute of Technology Madras, Chennai during 30^th August 2013.
6. Two day ‘Orientation Programme for faculty’, organized by JNTUK in association with Indo US Collaboration for Engineering Education (IUCEE) during 16-17 July’2013 at University College of Engineering, JNTUK, Vizianagaram.
7. Faculty development programme on “Soft skills for effective teaching” at JNTUK University college of Engineering, Vizianagaram, during 13-15 June, 2013.
8. One day Workshop for “Training resource persons on outcome based accreditation – Phase-I”, conducted by NBA nodal centre, JNTUK on 29^th April, 2013.
9. Two day workshop on “Resigning of Engineering Curriculum in the context of outcome based learning”, Organized by NTUK during 24-25 February, 2013.
10. National workshop on Quality Research and Young Scientist Sensitization, JNTUK, Kakinada, 23^rd Oct’2010
11. Pre-conference workshop on Challenges in micro and nano manufacturing: Indian perspective in the global scenario, AU, Visakhapatnam, 11-12 Dec’2010
12. National seminar on Micro Electro Mechanical Systems (MEMS), Department of Instrumentation Engineering, AU, Visakhapatnam, 24-25 Sept’2010
13. Workshop on Fatigue, fracture and Creep of materials and components, Department of Mechanical Engineering, AU, Visakhapatnam, 23-25 Mar’2009
14. National workshop on composite materials, Department of Metallurgical Engineering, AU, Visakhapatnam, 27-28 Feb’2007
15. DST sponsored Short term course on Entrepreneurship development programme organized by National institute of small industry extension training, Hyderabad, 24^th May – 3^rd June 2006.
16. Short term course on Web Design, Quality improvement programme conducted by NITTT&R, Chennai, 1-5 Nov’2004.

International Conferences:

1. Ramakrishna, S. Srinivasa Rao and G. Swami Naidu, “investigations on post- weld heat treated friction stir welds of high strength aluminum alloy”, sermat-      2019, ssn college of engineering, chennai, 14-15 march 2019
2. Ramakrishna, S. Srinivasa Rao and G. Swami Naidu, “Effects of post weld heat treatment on microstructure and mechanical behavior of friction stir welded           thick section Al–zn–Mg–Cu alloy, FLAME-2018, Amity University, Noida, Uttar    Pradesh, 03-05 October 2018.
3. Ramakrishna, S. Srinivasa Rao, G. Swami Naidu, S.R. Koteswara Rao and T.       Srinivasa Rao, “Effect of Post Weld Heat Treatments on Mechanical Behavior of Friction Stir Welded Thick Section 7075 Aluminum Alloy”, Young Professionals     International Conference 2017, Chennai trade centre, Chennai, 07-09 December 2017
4. Ananda Babu Varadala, Sai Mani P, Swami Naidu G and Sateesh B, “Evaluation of microstructure, mechanical properties and wear behavior of aluminum alloy 5083 processed by Equal Channel Angular Extrusion (ECAE) with half covered copper   casing”, International Symposium on Lightweighting for Defence, Aerospace and        Transportation” NMD-ATM-2017R-00475,Goa, 11-14 November 2017.
5. Jayaprasad Vanam, S Kamaluddin, N Mohan Rao and G Swami Naidu, “Finite Element Simulation of Aluminium Alloy Subjected to Equal Channel Angular   Pressing (ECAP)”, International Symposium on Lightweighting for Defence,       Aerospace and Transportation” NMD-ATM-2017R-00294,       Goa, 11-14 November           
6. Swami Naidu Gurugubelli, Satyanarayana Gampala, Sai Mani Paidi and Hari Babu N, “Optimization and Artificial neural network modelling for the prediction of effect       of red mud concentration and cold work on volumetric wear of nano red mud particle        reinforced aluminium matrix composites”, NMD-ATM-2017R-00454, Goa, 11-14      November 2017.
7. Hari Babu N and Swami Naidu Gurugubelli, “FEA of Al-SiC composite in Engine valve guides”, International conference on Electrical, Electronics, and Optimization Techniques (ICEEOT) – 2016, Chennai, Tamilnadu, during 3-5^, March 2016.
8. Srinivasa Prasad. K and Swami Naidu. G, “Wear Behaviour of Nano Fly Ash reinforced Aluminium-10 Magnesium Alloy Matrix Composites”, International    conference on Electrical, Electronics, and Optimization Techniques (ICEEOT) – 2016, Chennai, Tamilnadu, during 3-5, March 2016.
9. Raja Kandivalasa, Avinash Ben, Swami Naidu G and Raghu ram K S, “Low Power Consumption Mech-Automatic Flush - A mechatronic based water saver”,             International conference on Electrical, Electronics, and Optimization Techniques      (ICEEOT) – 2016, Chennai, Tamilnadu, during 3-5, March 2016.
10. Satyanarayana G., Swami Naidu G., Hari Babu N., “Deformation behaviour of al-10 wt% red mud particle reinforced nano Composites – wear studies”, International      conference on Material Processing Technology MPT-2016, Organized at Pune, during 5-7, January 2016, pp. 13-20
11. Sai Mani and G. Swami Naidu, “Evaluation of Erosion Characteristics of Glass- Epoxy composites Filled with red mud particles Using Taguchi Technique”, International conference “NMD-ATM-2014” organized at College of Engineering, Pune during 12-15, November 2014.
12. Swami Naidu, ‘The effect of Aluminium composition on the wear behavior of AlxCoCrCuFeNi high-entropy alloys’, NMD-2013, IIT Varanasi.
13. G Swami Naidu, ‘The effect of ageing on impact toughness and microstructure of 2024 Al-Cu-Mg alloy’, International conference on applied mechanics, materials and manufacturing (ICAMMM-2012), Kualalampur, Malaysia, 19-21 Feb’ 2012.
14. G Swami Naidu, AVSSKS Gupta, NRMR Bhargava, ‘Deformational inhomogeneity in Al-8Mg alloys- Microhardness study’, International Conference on Advances in Materials and Materials Processing (ICAMMP-2011), IIT Kharagpur, 9-10 Dec’2011.
15. K, Gowri Sankar. J, Gurugubelli. S. N, Satiah. N, Ramesh. M, ‘Expression and purification of ScFv protein in E. Coli Rosetta 2 (DE3)’, International symposium on desalination, drinking water quality in rural areas, drought mitigation and water reuse InDACON-2011, JNTUK, Vizianagaram, 24-25 Mar’2011.
16. G Swami Naidu, AVSSKS Gupta, NRMR Bhargava, ‘Microhardness studies of Al-4wt pct Mg alloys to analyze the deformation behavior’, 3^rd international and 24^th AIMTDR conference, AU, Visakhapatnam, 13-15 Dec’2010.

National Conferences:

1. Satyanarayana G, Narayana Rao K, Swami Naidu G and Bhargava N R M R, “Nano structured Red mud – Synthesis and XRD studies”, AICTE Sponsored National Conference on Recent Trends in Mechanical Engineering (NCRTME-2014), 21-22 FEB’2014.
2. Srinivas Prasad and G. Swami Naidu, “Nano fly ash – Synthesis and characterization”, AICTE Sponsored National Conference on Recent Trends in Mechanical Engineering (NCRTME-2014), 21-22 FEB’2014.

International journals

1. Ananda Babu Varadala, Swami Naidu Gurugubelli and Sateesh Bandaru, “Severe    plastic             deformation of AA 5083 and copper bimetallic metal” SN Appleid Sciences a springer nature journal, Springer publishers, Volume 2, Issue 9, 1562 (2020).

2. Anitha Santhoshi Madugula, Murali Krishna Baratam and Swami Nadiu Gurugubelli, “Electric discharge machining of AA2024 with specific wt% of red mud hybrid composites” Materials today proceedings, Elsevier Publications, June 2020.
3. Brahmananda Reddy Sathi, Swami Naidu Gurugubelli and Hari Babu, “TG and DSC Analyses of Equi-Channel Angular Processed Red Mud Particle Reinforced 5083 Aluminum Alloy Matrix Composites Synthesized by Stir Casting”, Trans Indian Inst Met, Springer Publishers, ISSN 0972-2815, (2020) 73(6):1655–1659.

4. Ch Durga Venkata Prasad, J Arout Chelvane and G Swami Naidu, “Effect of rapid thermal annealing on the structure, microstructure and magnetic properties of Fe thin films”, Phys. Scr. 94 (2019), 125803 (8pp).

5. Srinivas, I. Srikanth, G. Rama Rao and G. Swami Naidu, Effect of Volume Fraction of Reinforcement Layers on the Mechanical Properties of S-glass-Carbon-Epoxy Hybrid Composites”, Materials today proceedings, Elsevier Publishers, 18(2019), pp. 4580-4588

6. Ananda Babu. V, Swami Naidu Gurugubelli and Sateesh Bandaru, “Enhancement of structural and mechanical behavior of Al-Mg alloy processed by ECAE”, Materials today proceedings, Elsevier Publishers, 18(2019), pp. 2147-2151
7. Thadivaka Ramakrishna, Silaparasetti Srinivasa Rao and Gurugubelli Swami Naidu, “Strength and hardness of post- weld heat-treated thick section 7075 Al alloy         friction stir welds”, Materials Testing, May, Vol. 61, No. 5: Pages 411-416
8. Ramakrishna, S. Srinivasa Rao and G. Swami Naidu, “Effects of Post-weld Heat Treatment on Microstructure and Mechanical Behavior of Friction Stir Welded Thick             Section Al–Zn–Mg–Cu Alloy”, Lecture notes in mechanical Engineering book series,       2019, pp 31-40
9. Anitha Santhoshi Madugula, B. Murali Krishna and Swaminaidu, “Experimental Investigations on Wear Behavior of AA20204-Flyash- Nanostructured Redmud    Hybrid Composites Synthesized by Stircasting”, International Journal of Surface   Engineering and Interdisciplinary Material Science, Vol 6, Issue 2, 2018, pp 23-35.
10. Gampala Satyanarayana, Gurugubelli Swami Naidu, N. Hari Babu, “Artificial neural network and regression modeling to study the effect of reinforcement and deformation on volumetric wear of red mud nano particle reinforced aluminium            matrix composites synthesized by stir casting”, Boletín de la sociedad española de cerámica y vidrio 57, 2018, pp. 91–100, ELSEVIER Publishers.
11. Srinivasa Prasad Katrenipadu and Swami Naidu Gurugubelli, “Regression Modeling and Experimental Investigations on Ageing Behavior of Nano-Fly Ash Reinforced Al- 10wt%Mg Alloy Matrix Composites”, International Journal of Surface Engineering and Interdisciplinary Materials Science, Volume 6, Issue 2, 2018, pp. 36-49.
12. Ananda Babu. V, Swami Naidu Gurugubelli and Sateesh Bandaru, “Equal channel angular extrusion of semicircular AA5083 with covered copper casing”, Journal of             Emerging Materials Research, ISSN: 2046-0147, ICE Publishing, Vol.7, Issue.3,   2018, pp.1-14.
13. Ananda Babu. V, Swami Naidu. G and Sateesh. B, “Equal Channel Angular Extrusion of AA 5083 alloy with copper shielding”, Journal of Advanced Materials Research, Trans Tech Publications, ISSN: 1662-8985, Vol. 1148, pp 82-87
14. Siva Karuna1, S. Venu Gopala Swamy and G. Swami Naidu, “Effect of Blast Furnace Slag and Red Mud Reinforcements on the Mechanical Properties of AA2024 Hybrid Composites” Journal of Advanced Materials Research, Trans Tech Publications, ISSN: 1662-8985, Vol. 1148, pp 29-36.
15. K Santarao, C. L. V. R. S. V Prasad, G Swami Naidu, Influence of dominant variables and their optimization for nanopowder blended EDM process, Journal of Engineering Technology, AmericanSociety for Engineering Education (ASEE), ISSN: 0747-9964, 2017, Vol 6, pp. 164-169
16. K Santarao, C L V R S V Prasad, G Swami Naidu, Employing SiC nano-powder dielectric to enhance surface characteristics in electrical discharge machining of AISI D3 steel, International Journal of Engineering and Technology Innovation, Taiwan Association of Engineering and Technology Innovation, ISSN: 2223-5329, Scopus & Emerging Sources Citation Index, Impact factor 0.059 (accepted)
17. K Santarao, C L V R S V Prasad, G Swami Naidu, Parametric optimization of nano powder blended electrical spark machining process on AISI D3 DIE steel employing grey relational analysis, Journal of Materials and Environmental Sciences, University of Mohammed Premier Oujda Publishers, 2028-2508, Scopus, Impact factor 0.837 (accepted)
18. Santarao, C. L. V. R. S. V. Prasad, Swami Naidu Gurugubelli, “Influence Of Nano And Micro Powders  In Electric Discharge Machining: a review”, Journal of Manufacturing Technology Research, Nova Science Publishers, ISSN: 1943-8095, Vol 8, Number 1-2, pp. 11-20,  2016, Scopus, Impact factor 0.315.
19. Santarao, C. L. V. R. S. V. Prasad, Swami Naidu Gurugubelli, “Experimental investigation on influence of SiC nano powder blended dielectric in electric spark machining”, International Journal of Modern Manufacturing Technolofies”, ISSN:2067 – 3604, Vol X, No. 1, pp. 84-91

20. K Santarao, C L V R S V Prasad, G Swami Naidu, “Experimental Investigation To Study The Viscosity And Dispersion Of Conductive And Non-Conductive Nanopowders’Blended Dielectrics”, Advances In Science And Technology-Research Journal, Lublin Univ Technology publishers, Poland, ISSN: 2299-8624, Emerging Sources Citation Index , 2017, Vol 11., pp 154-160
21. Alekhya Medepalli, Swami Naidu Gurugubelli, “Friction stir welding of dissimilar Al-alloys at different welding parameters: Experimental testing and finite element analysis”, International Journal of Modern Engineering and Research Technology, ISSN: 2348-8565, Vol 5, Issue 4, 2018, pp. 231-240
22. Ambedkar, B.R., Naidu, G.S., Lalitha, V.S.S., Krishna, D.M., “Microstructural and mechanical Properties of aluminium and magnesium bimetal extruded composite:, Journal of Production Engineering, 2016, Vol. 19(2), pp. 49-52
23. Satyanarayana; G. Swami Naidu; N. Hari Babu, The effect of deformation on wear behaviour of Al-5% red mud particle reinforced nano composites synthesized by stir casting, Int. J. of Materials Engineering Innovation, Inderscience Publishers, 2016 Vol.7, No.2, pp.115 - 129
24. Swami Naidu Gurugubelli, “Experimental Investigations on optical and mechanical properties of al-8Mg alloy processed by equal channel angular extrusion”, International journal of materials engineering and innovation, Inderscience Publishers, 7, No.1, 2016, pp. 26-32.
25. Gurugubelli S N, AVSSKS Gupta, NRMR Bhargava, ‘Deformational inhomogeneity in Al-2 wt pct Mg and Al-8 wt pct Mg alloys- Microhardness study’, International journal of materials engineering and innovation, Inderscience Publishers, 3, No. 1, 2012,  pp. 32-49.
26. Swami Naidu, AVSSKS Gupta, NRMR Bhargava, “Ageing and corrosion studies of cast Al-8wt%Mg alloys”, International journal of material science, Vol. 6; 2011, pp. 197-201.
27. Swami Naidu, AVSSKS Gupta, NRMR Bhargava, ‘Deformational inhomogeneity in Al-4Mg alloys – Microhardness study’, International journal of Manufacturing technology research, Vol. 3, Issue 3-4, 2011.
28. Swami Naidu, AVSSKS Gupta, NRMR Bhargava, ‘Deformational inhomogeneity in Al-8Mg alloys- Microhardness study’, International Journal of Materials and Structural Integrity.
29. Swami Naidu Gurugubelli, “Studies on Recovery and Recrystallization Kinetics of 18-8 Stainless Steels using Differential Scanning Calorimetry”, International journal of Advanced Materials Science, Vol. 3, 2, 2012, pp. 97-101
30. Swami Naidu, “Experimental investigations on corrosion behavior of cast Al-Mg alloys”, International Journal of Engineering, Science and Metallurgy, Vol. 2, No. 2, 2012, pp. 630-633.
31. Swami Naidu Gurugubelli, “Experimental investigations on bulge profile of Al-Mg alloys during cold upsetting”, International Journal of Science and Advanced Technology, Vol. 2, No. 5, 2012, pp. 184-186
32. Swami Naidu Gurugubelli, “Experimental investigations on structure and mechanical properties of semi solid casting of gray cast iron”, International Journal of Advanced Scientific and Technical Research, Issue 2, Vol. 3, 2012.
33. Rajesh D., Swami Naidu Gurugubelli, “CFD analysis of two-phase flow to predict pressure drop for low mass fluxes of refrigerants”, International journal of Advanced Technology and Engineering Research, Issue 4, Vol. 2, 2012, pp. 198-201.
34. Rajesh Egala and Swami Naidu Gurugubelli, “Unsteady multi-phase analysis of free-surface flow in washing machines using computational fluid dynamics”, International Journal of Mechanical Engineering Research, Vol. 2, N0. 2, 2012, pp. 209-215.
35. Swami Naidu Gurugubelli, “Experimental Investigations on tensile properties of Al-Mg alloys at warm temperatures”, International Journal of Engineering, Science and metallurgy, vol. 2, No. 3, 2012.
36. Gurugubelli S N, AVSSKS Gupta, NRMR Bhargava, “The effect of magnesium concentration and Deformation on the ageing behavior of Al-Mg alloys”, International journal of materials engineering and innovation, 2013 Vol.4, No.1, pp.57 – 64
37. Satyanarayana G, Narayana Rao K, Swami Naidu G and Bhargava N R M R, “Nano structured Red mud – Synthesis and XRD studies”, International Journal of Mechanical Engineering and Material Sciences, Serials Publications, ISSN 0974-584X, Vol. 7, No. 1, pp.63-65
38. Srinivas Prasad and G. Swami Naidu, “Nano fly ash – Synthesis and characterization”, International Journal of Mechanical Engineering and Material Sciences, Serials Publications, 2014, Vol. 7, No. 1, pp.67-70
39. Kameswari Bolem1, Anandababu Varadala2, Swami Naidu G, “Equal Channel Angular Pressing of Aluminium Alloy 5083 using different die geometries”, International Research Journal of Engineering and Technology, Vol. 4, Issue 5, 2017, pp. 3357-3362